AF Hydro Stainless Steel SS316 Y-Strainer Filter Valve - 3" NPT, 800 PSI, 1.0mm Mesh - Heavy Duty Y-Shaped Filter for Water, Oil & Gas Systems | Ideal for Industrial Piping, Plumbing & Fluid Control Applications

Product Description

Welcome to AF Hydro! AF Hydro is an one-stop destination for low pressure valves and fittings. Established in 2016, we strive to deliver top-notch products to our clients. A wide selection of high-quality products are available and designed to ensure seamless flow and efficiency in your operations. Low Pressure Y-Stainer - Stainless Steel NPT Thread 800 PSI The Y-Strainer functions as a mechanical filtration device, segregating solid particles and liquids from fluids while trapping debris to prevent pipeline equipment from detrimental effects of contaminants. The effectiveness of the Y-strainer relies on its mesh filter, which decides the size of particles permitted to pass through, preventing particles entering system. Y-strainer’s regular cleaning can be done by shutting down system and removing strainer cap to remove debris. Applied to filter out particulates from steam, gas or fluid application. It is cost-effective. Mesh size is 1.0 MM or 0.2 MM. Made of Stainless steel 316. With NPT threaded end Maximum working pressure is 800 PSI. To install the Y-strainer, kindly refer to the steps below; Clear the installation area and ensure it's clean and free of debris.Identify the optimal location for the strainer in the pipeline. Ensure there is enough space around the strainer for maintenance and cleaning.Apply pipe thread sealant or thread tape to the male threads of the strainer and any pipe fittings to prevent leaks.Thread the Y-strainer onto the pipe, ensuring it is securely tightened. Use wrenches to tighten the connections, but avoid over-tightening, which could damage the strainer or fittings.Verify that the strainer is properly aligned with the pipeline and is not under any stress or strain, check for any leaks. Product Specifications Product Type Y-strainer Connection Type NPT Threaded end. Size Range ½”-4” Mesh Size 1.0MM or 0.02MM Material Made of Stainless steel 316 which has higher resistance against rust. Working Pressure 800 PSI Working Temperature -20°C to 230°C Usage Collect containment and particles